Plastic injection molding machine

Plastic injection molding machine assembling parts:

Plastic injection molding machine main function is cycling it from melt the thermoplastic material ,then injection, then pressurize and last cooling ,then got the products.

There are the normal parts assembling: Hydraulic system, injection system, mold system and clamping system.

Plastic injection molding machine injection system including hopper, rotating screw and nozzle, injection system main function is to responsibility feeding material, presure , venting, melt ,injection and pressurize.

1.Hopper from plastic injection molding machine: particle thermoplastic material install inside the hopper, then feed to the barrel and screw by the weight pressure

2.Barrel from plastic injection molding machine: the barrel loaded the rotating screw and heated by the heating ring.

3.The rotating screw from plastic injection molding machine:

It function is for pressure, melting and delivery the material, and it formed with feed zone, transition zone and metering zone. 

When the screw outside dimeter is stable, the depth of rotating screw's thread will be cut down from feed zone to metering zone, then the material will be melt by it. the heating ring outside the barrel could keeping the material with melting status. Generally, one set of plastic injection molding machine will have 3 zones or more heating rings for keeping the temperature , the heating rings with different temperature due to it in different zones. 

4.Nozzle from plastic injection molding machine, the nozzle connected with barrel and main sprue bushing of the mold, and made the apace with sealing.

The nozzle temperature should be the same with the plastic material melting temperature or a little lower than it, it could suggest by the material supplier, because they have more professional ideas.

When the barrel in a status of full material and will be injection, the head of the nozzle should be in a correct position 

When clean the barrel, should remember to backward the barrel , should take part of the sprue, then the material will falling directly.

Hydraulic system:

Plastic injection molding machine could supplier a force for open and close the mold , rotating and drive the screw, push the ejector pin and made the core moving. this step need the pump ,valve and motor ,connector and so on parts cooperation.

Control system:

Control system could promise the equipments keep working for a long time, could administrate and control the date like temperature ,pressure ,injection speed and the screw speed, position ,and the hydraulic system status.

Plasticinjection molding machine function of the clamping unit:

1.support the mold

Supporting the mold together with the leading it opening and closing , then it required the clamping system have enough force to moving the movable platen.

2.clamping the mold

When the melting plastic material is injection to the mold cavity should keep the mold with sealing status, so need it to clamping the mold .

3.provide ejection

When the products molding, mould opening, need it provide ejection force.

Plastic injection molding machine special for plastic mold , we could provide from standard plastic injection molding machine ,servo motor plastic injection molding machine, high speed injection molding machine...

Recently our company are researched new kind of plastic injection molding machine , due to the market demands.

We are try our best to supplier customer with high performance ,more speed, more accurate, more stable plastic injection molding machine, we could provide customer professional suggestion before bought and after bought our machine.

Before you bought, we could suggest you which kind of machine is the most suitable based on the mold and products you produced.

After you bought our machine, we could help you to installation and help fixing when you have no good idea .

We are the professional and specialist ! 

Snow 

export3@cnmould.com