Maintain of the injection molding machine

To enlong the machine life time,the machine maintain is very important.,good maintain could reduce the cost and improving the production.Important,good machine could provide high quality products.

1.As a new machine ,then we should checking the machine before operation

Checking the oil tank:the volume should within the capacity

Checking the oil and indoor temperature: when the temperature is so low,then we should pre-hot the oil,if the temperature is so high,then we should adopt cooling equipment.

Checking the pressure gage,it could back to "0" or not

Checking the temperature control part:temperature controller,temperature sensor ,heating ring and so on.

2.when operating plastic injection molding machine:checking the pump send out the oil or not,with arguly voice or not,pressure gage normal or not?

3.Checking the oil ,pump shell, electromagnet temperature:oil temperature should be from 20 centigrade to 50 centigrade,pump shell temperature should be high than the indoor temperature from 10 centigrade to 30 centigrade.

4.Checking the voice :checking the oil pump ,electromagnet have arguly voice or not,keeping it at a good statues.

5.Pressure gage checking

6.Electrical device working condition, safety device reliability inspection

7.Checking column, oil cylinder components fastening nut and screw loose or not

8.When off work,should checking the machine,every parts back to good statues or not

9. Every three months checking the machine,and every year checking the machine

Snow

Export3@cnmould.com