Air assistant technology

Gas assistant technology is a technology which inject a certain nitrogen with high pressure before injection finish(around 75%~99.9% plastic material filled the cavity),we use air to press the plastic to fill the left space in the products, which can avoid holding pressure after finish.So that we can save plastic raw material.

According to our experience, gas assistant is usually use in toilet parts(cover and seat, almost cover), plastic chair mould and some other big plastic parts. Using this technology can help clients save a lot of raw material cost. 

What’s more, we found during mould design, we can make more simple structure for gas assistant mould according to the mould flow analyze. Gas technology also can improve mould and machine life time ,because clamping force of the machine and mould inside pressure can be reduced. Gas assistant products have low probability have shringkage mark and demolding. The injection cycle time is also shorter compare with normal injection.

As a professional plastic injection molding factory, we take our responsibility in every steps. From product design, mould design to mould manufacturing, mould testing. Once we take an order, we have project manager to follow the project till finishing including after sale service. We hope to offer clients a prefer plastic solution not only a product.

Any question, welcome to our factory for further discussion.

Snow

Export3@cnmould.com