In the molding process, the technology of
the thin wall plastic injection mold is important. We choose the correct steel
to ensure products dimension, based on the requirementof clients we would adopt
right measurement.
1.Thin wall high speed injection mould
suppler: SINO MOULD Co.,Ltd
2.Hot runner supplier: Anole Hot Runner
3.Robot suppler:DKM robot system S.A,Italy (which
is consist the technology from China robot area and Italy technology)
Main Chinese thin wall injection mold
technology problem:
1.Air system design: Trapped gas, burns and
short shot due to the thin wall forming of large area
2.Control of the deformation: hard ejection
of the forming because of the complex of the mold structure
3.Guarantee of thin wall mold intensity: ensure
the mold overall compression based on the structure and material used
4.Research of the thin wall forming
technical: thin wall products' flow channel is narrower than the traditional's
,easier cooling during the forming process, this is the key point
Technology of thin wall high speedinjection molding solution:
1.Design exhaust block, no matter mold
cavity or flow channel to make sure venting fluently ,disappear the Trapped
gas, burns and short shot ...
2.About deformation control, we designed
ejector plate to avoid euub and deformation
3.Guarantee of the mold intensity:
(1)structure design: extension the hot
runner in the front mould, enhance the thickness ,use the whole frame structure
between mold base and B plate
(2)Materiel used, mold cavity use steel S136
and mold base we will use our SINO standard base.
4.Optimization molding process parameters, make
reasonable molding process to ensure the technology specification
If you have any project for plastic injection
molding or looking for a plastic injection molding solution, please feel free
to let me know. And if it is convenient for you ,you can come to visit us. Our
address is 369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
Snow
Export3@cnmould.com
没有评论:
发表评论